Skip to product information
1 of 10

Maypole MP7428 Electronic Battery Charger Smart 8A 12V Automatic Electronic Maintenance

Maypole MP7428 Electronic Battery Charger Smart 8A 12V Automatic Electronic Maintenance

Vendor:Maypole

Availability: Low stock: 2 left

Product Type:MP7428

Product Indentifier:7426994766730

Regular price

£48.01 £40.01 ex VAT

Regular price £39.00 Sale price £40.01 ex VAT
Sale Sold out
Shipping calculated at checkout.
View full details

12V ELECTRONIC MAINTENANCE 8 amp SMART CHARGER 1.2ah to 192ah

MP7428

Description

  • Fully automatic powerful smart charger recommended for a wide range of vehicles
  • Suitable for vehicles up to 5L (5000cc)
  • IP65
  • For use with batteries 1.2Ah – 192Ah in capacity (Lead Acid & AGM)
  • 9 stage charging cycle – automatically detects the battery voltage and condition before diagnosing, charging and reconditioning the battery
  • LCD display showing charging information (battery voltage; charging current; % of full battery capacity)
  • Reverse polarity, short circuit and open circuit protection
  • 1.5m output leads fitted with insulated crocodile clips
  • LED error indicator for reverse polarity, short circuit or open circuit
  • Wall mountable robust case
  • Suitable for start/stop vehicles
  • High frequency charger – does not have a transformer
  • Supplied in modern display packaging
  • Suitable for: cars, 4×4’s, vans, caravans, motorhomes and tractors

FAQ

Do I connect both the round clips to the battery posts or does the "negative" clip have to connect to somewhere on the chassis?

When using the ring terminal connecting lead, the negative lead can be directly connected to the battery post. When fitting this lead to the battery, it should be disconnected from the battery charger and the protective cap should be fitted to the in-line terminals. When connecting to this lead to the charger, the charger should not be connected to the mains. This is to avoid causing sparks near to the battery when making the connection.

How long does it take to recharge a flat battery?

  • Please note – MP7428 needs a 12V battery to be at a minimum of 1.5V before it will attempt to charge.
  • An indication of the time required to recharge a flat battery can be calculated by the following formula:
  • Battery capacity in Ah x 1.25 / Charger rated output


The time required by any device to fully charge a battery can be effected by environmental conditions and battery condition. Maintenance charging will sustain a fully charged battery in optimum condition whilst minimising the risk of long-term damage to the battery due to either under-charging or over-charging.



My charger is stuck at 95% and will not progress beyond this point.

  • If the battery remains connected to a vehicle whilst being charged, the additional load placed on the electrical system may influence the behaviour of the charger and inhibit the chargers progress. To attempt to charge the battery to 100% it would need to be removed from the vehicle.
  • If the battery is not connected to a vehicle, being stuck at 95% could suggest the health of the battery has deteriorated and the charger is unable to progress beyond this point, this would depend on the age and condition of the cell. To test this, please connect the charger to a known working battery to see if the behaviour of the charger differentiates.

ANOTHER QUALITY MAYPOLE PART (A UK Based Company)

Review

  • * All products come with 12 months warranty unless otherwise stated.
  • * Please contact us with any issues so we can provide a solution for you.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
top product

this is a great little charger from a very proffessional company

  • Click & Collect Available At Checkout

    Quantity Discount Calculated At Checkout

  • All Prices Exclude 20% VAT

    Vat Will Be Calculated At Checkout

  • Fast Shipping

  • We Only Ship To The UK & Ireland