On Off Rocker Switch Mini Green Rectangle Square 12V Robinson K423

12V On/Off Green Rectangular Rocker Switch

K423

Easy setup

• 13mm wide x 18.5mm hole is required and the switch will sit in nicely
• Green face will light up when the switch is turned on
• 2 pole design (On/Off)
• 3rd poles with bulb to be connected to earth

3 Lucar Terminals

• + into switch
• + out of switch
• Earth

• Note 1 On/off rocker switch
• Note 2 Green
• Note 3 12v, 15A

• Switch type: ROCKER
• Switching method: ON-OFF
• Contacts: configuration SPST
• AC contacts rating: A / 250 V
• Actuator colour: black
• Max. contact resistance: 50mΩ
• Leads: 4.8 x 0.8 mm connectors
• Flammability rating: UL94V-2
• Illumination: bulb
• Electrical life: 6000cycles
• Button marking: I 0
• DC contacts rating: 15 A / 12 V
• Body material: polyamide
• Backlight colour: Green

*at resistance load
**at resistance load


What do SPST, SPDT, DPST, and DPDT mean?
SP and DP refer to single pole and double pole, ST and DT refer to single throw and double throw.

Pole refers to the number of circuits controlled by the switch: SP switches control only one electrical circuit. DP switches control two independent circuits (and act like two identical switches that are mechanically linked). Do not confuse ‘pole’ with ‘terminal’. The DPST switch, for example, has four terminals, but it is a DP, not a 4P switch.

Throw refers to the extreme position of the actuator: ST switches close a circuit at only one position. The other position of the handle is Off. DT switches close a circuit in the Up position, as well as the Down position (On-On). A DT switch can also have a center position (frequently On-Off-On).